Latest News

Thank you from Port Adelaide Cricket Club

March 13, 2024

Port Adelaide Cricket Club (PACC) has thanked Adbri for our ongoing support for their culturally diverse club, not far from our Birkenhead manufacturing facility. We are helping build a better Australia by supporting the club’s women’s and junior programmes. PACC is just one of many groups we sponsor in the communities in which we operate.

Read story

EPA approval for increased use of alternative fuel at Birkenhead

February 15, 2024

After a successful trial, the SA EPA has approved Adbri Cement’s application to increase the use of Refuse Derived Fuel (RDF) at our Birkenhead manufacturing facility. The EPA permitted the use of up to 32 tonnes per hour of RDF after a thorough review of all data in our post-trial report. That is the permitted […]

Read story

Come along to Port Community Arts Centre’s 6 of the Best Exhibition

February 14, 2024

As a proud long-term supporter of the Port Community Arts Centre (PCAC), we encourage everyone to check out their 6 of the Best exhibition. We congratulate all the artists exhibiting and PCAC for their dedication to the Port Adelaide community. Details in the PCAC flyer

Read story

Adbri Engineering Scholarship holder Elisha Bialowas 

February 6, 2024

Congratulations to Adbri Engineering Scholarship holder Elisha Bialowas (pictured) for completing her third year of study toward her Bachelor of Engineering (Honours) (Chemical) with a Bachelor of Mathematical and Computer Science, with excellent grades.  The University of Adelaide has thanked Adbri for the scholarship won by Elisha for helping “outstanding students”, like Elisha, to “achieve […]

Read story

Adbri Cement supporting Adelaide International Kite Festival again

December 20, 2023

We are proudly sponsoring the Adelaide International Kite Festival again. It will be held at Semaphore beach over the Easter Long Weekend. Easter Saturday 30 March – Easter Monday 1 April, 2024 – 10am-5pm daily. The Semaphore Jetty is the best place to see the kites flying.

Read story

Adbri Cement Birkenhead January Shutdown for maintenance

December 15, 2023

Each year we shut operations at our Adbri Cement (Adbri) local South Australian manufacturing facility at Birkenhead to undertake scheduled maintenance and repairs. Our facility is next scheduled to be shut between 5 January and 9 February, 2024. During this time, up to 600 engineering and trade contractors will be on site. Adbri will be […]

Read story

Dockside Festival cancelled

December 7, 2023

See notice from Port Adelaide Enfield Council Unfortunately, due to the extreme weather forecast across the weekend, we have made the difficult decision to CANCEL Dockside Festival 2023 🌧️💔 The safety of our community, participants, and staff is our top priority, and after careful consideration, we’ve had to make this tough decision. We understand the […]

Read story

Cancellation of community event this weekend

December 7, 2023

Rotary Club of West Lakes, the organisers of the West Lakes Christmas Fun for Kids at the Neighbourhood Reserve on Sunday afternoon/evening have contacted Adbri to advise us that this event has been cancelled because of forecast extreme weather this weekend.

Read story

Exciting Port Adelaide Dockside Festival returns this weekend

December 4, 2023

Congratulations to Port Adelaide Enfield Council on once again holding the exciting Dockside Festival in Port Adelaide. We are delighted to be sponsoring this flagship Festival again this year. We wish everyone a happy weekend, enjoying all the fun activities the Festival offers. Adbri Cement has been around for 141 years and we are happy […]

Read story

Crane visible at Birkenhead manufacturing facility this Sunday and Monday

December 1, 2023

1 December, 2023 A crane will be visible on our Birkenhead manufacturing facility this Sunday and Monday. SA Power Networks will be bringing the crane onsite about 930 am on Sunday, ready to do lifting of a control room from 7 am on Monday. The lifting will take about 2 hours, followed by about 4 […]

Read story

Join the
conversation

Community
feedback